Now for the interior upgrades!
The first thing we upgraded was the radio. The original single cassette player, although vintage, came equipped with a 6 cd changer under the rear seat. This however, was impractical for our trip and we wanted something a little more modern that we could stream music to or connect an aux cable from an alternate device, along with options to charge mobile devices in one. We swiftly unmounted the rear changer and replaced the original radio with a Kenwood KDC-X500.

We know we are going to be doing a lot of miles in this little car (hopefully) and I also wanted a way to plug in a sat nav.
Conveniently, on the dash there’s a spare hole, roughly the size of a cigarette lighter, but in order to install this, we had to remove the wooden dash in order to run wires from the front of the car to the battery situated in the boot.

We, (my brother and myself) took this time to also clear some residual wires left by the previous owner that ran from the footwell in to the engine bay, via a relay. Weirdly, these was severed in the interior and I had no idea what they were for so they came out.

The next repair was the heater. It worked when the blower was set to the second speed but the first speed was knackered. It needed a new resistor and then it was back in action and like new.
All the Speedometer and gauge lights was upgraded from the original 10w bulbs to cool white LED’s along with the interior cabin light.

The final electrical accomplishment that we wanted, was a light in the boot. We had already ordered a boot liner kit and when we installed that we discussed where we should attach a switch. We wanted a place where the switch was easily accessible but also in a position where it wouldn’t get knocked or accidentally switched on mid way through a journey. Below is where we settled on, nicely tucked away in the corner.
Still need to install a black boot door protector, but i’m very happy with how this has turned out.
Next stage, to rejuvenate the tired interior woodwork!


