USA: San Fransisco – Seven Mini Enterprise – Camp Lotus

We grabbed the car from the Valet. They didn’t know how to get in to the car so came down the stairs and asked us if we could move it ourselves which was quite funny and much preferred by us. We started Olive up and drove down the ramp and was immediately reminded, by her, that something was wrong. The noise was still there so it wasn’t because she was hot. We pulled in to a quiet nook in the parking lot and had a thorough check. Oil was good, coolant was good, body work seemed good. I checked the suspension, I tried rocking the engine to check the mounts was still in tact and all seemed good. Then I went round and checked the tyres and found the issue. The passenger front wheel. 2 out of 4 of the lug nuts were loose. Like really loose. They must have become un-lodged on the winding roads on the way in to San Fransisco and reached a point where the wheel was unbalanced. I grabbed the tool kit, tightened up all the lugs, did a round on all the other wheels and they all seemed fine and finished packing the car. One issue fixed, now the other! We pulled out the garage and hit the road. The road system in San Fransisco is crazy! Roads, seemingly come out of and go under things and pop out of places all over the place. It’s like spaghetti junction in there! So we was glad to be finally heading out the fastest way possible towards Seven Enterprises . I had called the day before and they had heard about our journey on the Mini forum, had checked out our blog, and was eager to meet us, especially as Jack was planning on doing the Alcan 5000 (A 4,700 mile rally conducted in North America) which included a portion of the route we had just completed.

We drove through Sacramento, taking the most direct route, still with our “Brake lights not working sign” attached to the back and met the guys in the early afternoon. They was awesome. The whole team was polite, friendly and really informative. They listened to our story, the problems we had encountered, what we had done to the car already to get it through the trip so far and also the issues that we wanted them to look at. We asked if they wouldn’t mind just giving the car a proper look over, make sure there wasn’t anything glaringly obvious that needed drastic attention that I had missed, but also to have a look at the brake light switch bracket and switch and whilst they was looking over the car mend the one fog light I couldn’t find the problem with.

Nick and Ash jumped us to the front of the queue, raced round the little car fixed the fog light in no time, it turned out to be the connection between the wires and the lamp had been dislodged, so the loom and the fitment of the new lamp was good, just needed re-soldering and heat wrapping. They even tidied up some of the dodgey wiring in the indicator loom (from previous owner). Now the bracket that I had so easily snapped wasn’t as straight forward, they didn’t have a spare one, they don’t usually break, but they drilled out the welded in bolt and replaced it with a new one (that is removable incase that happens again). We tested the update round the block but noticed that the brakes still was, at best, intermittent. This wasn’t to do with the adjustment but rather the actual switch. I had purchased the spare from MiniSpares, it’s the only one they supply, but it’s cheaply made and the connectors wobble around. It was something that I initially thought weird but assumed it was “the thing”. It’s not. They are crap, don’t buy them from MiniSpares, it will cause you nothing but heart-ache. Nick, hunted round the workshop in search of a heavy duty switch and managed to dig one up, made by Lucas. It was 1000 times better made, none of the connectors wobbled about and the plunger that connected the contacts seemed secure. It also didn’t spark when the contacts hit, something that always worried me in the previous version.

The other issue was the brakes, they had never been quite 100% since changing the brake pads and rotors in Vancouver. They worked but there was always a little judder under foot. Nick and Ash removed the drums and inspected and they showed me the damage. The drums must have slightly warped and was rubbing in various places around the drum. Now they could grind it down, sand it to make it smooth which would have been a couple of hours or they could install brand new ones. We went with the new ones. We re-adjusted the handbrake, and the rear brakes and then re-tested. We drove it round and it was a lot smoother braking, however this caused a new issue. The drums was getting seriously hot. Like put a drop of water on them and steam would come off kind of hot after maybe 20km. We loosened the brakes from the hub a couple of notches and all was fixed. The car was back to full 100% form again 🙂 Nick even took the time to show me a couple of other maintenance things and gave me a brake adjustment spanner for free to help with the rest of the trip. They was super helpful, and I couldn’t recommend them enough. Really enthusiastic with in depth knowledge of mini’s from the old Moke’s, through to the carb setups and the injection ones.  One which they was having problems with in store, I tried to link up the diagnostic machine I had but it needed a different pod (one I had back in Vancouver) so couldn’t read the issues, just the air bag. Sorry guys!

Thanks again for your help and advice, it was hugely appreciated and was in-valuable for the rest of the trip. Check them out. (not a paid endorsement)

We threw their sticker on the roof box and headed off for our camp for the night, 40-ish km away at Camp Lotus; a lovely little camp next to a river, with fire pits, nice private sites, showers and clean amenities. It felt good to have Olive back running well again, no more squeaks or broken components! The road awaits!

Leave a Reply